Writing To A Memory Channel; D Writing To The Selected Channel - Icom ID-31A PLUS Advanced Manual

7
MEMORY OPERATION

Writing to a Memory channel

After selecting a frequency in the VFO mode, you
can write it to a selected channel or an automatically
selected blank channel�
Memory channels 001 to 499 are blank as the default�

D Writing to the selected channel

Example: Writing 441�100 MHz into Memory
channel 011
1� Push [V/MHz] to enter the VFO mode�
2� Rotate [DIAL] to select 441�100 MHz�
3� Hold down [S�MW] for 1 second�
• Enters the Select Memory Write mode�
• The Memory channel number blinks�
4� Rotate [DIAL] to select the Memory channel "011�"
L If you select a pre-entered channel, the previous
channel content will be overwritten�
5� Hold down [S�MW] for 1 second�
▼
• Writes into the selected Memory channel�
• Returns to the standby screen (VFO mode)�
TIP: You can also save the Memory content to
another channel by selecting:
• 00A/00B ~ 24A/24B: Saves to a Program Scan Edge
channel
• C0, C1: Overwrites to a Call channel
• VFO: Overwrites to a VFO
Blinks
Blinks
Briefly displayed
D Auto increment
If you keep holding down [S� MW] after writing to
the selected Memory channel, the Memory channel
number is automatically incremented after returning to
the VFO mode� (Step 5 to the left)
▼
▼
7-4