Icom ID-31A PLUS Advanced Manual page 57

4
D-STAR OPERATION
Entering new information into the repeater list
D Entering new information into the repeater list
Step 1. Selecting the repeater group
MENU > DV Memory > Repeater List
1 Push [MENU]
2 Select "DV Memory"
3 Select "Repeater List"
4 Select a repeater group to add a repeater to
• Displays the repeater list of the selected repeater
group
5 Push [QUICK]
6 Select "Add"
• The REPEATER LIST EDIT screen is displayed
Step 2. Selecting the communication type
1 Select "TYPE"
2 Select the communication type
• DV Repeater: Repeater operation in the DV mode
• DV Simplex: Simplex operation in the DV mode.
• FM Repeater: Repeater operation in the FM mode
• FM Simplex: Simplex operation in the FM mode.
[Up]
[ENT]
[Down]
(Example: 11: Japan)
Step 3. Entering the repeater name
1 Select "NAME"
2 Enter a name of up to 16 characters
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! " # $ % & ' ( ) * +
, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
L See page iii on how to enter characters
3 After entering, push [ENT]
Step 4. Entering the repeater sub name
1 Select "SUB NAME"
2 Enter a sub name of up to 8 characters
3 After entering, push [ENT]
Step 5. Entering the repeater call sign
L When Step 2. Selecting the communication type
is set to "DV Simplex" or "FM Simplex," go to
Step 7. Changing the repeater group
1 Select "CALL SIGN"
2 Enter the repeater call sign of up to 8 characters,
including spaces and the node letter
NOTE: BE SURE to add the repeater node
letter in the 8th digit of the call sign, according
to the frequency band shown below Note that
there are almost always different node letters
between Japanese D-STAR repeaters and
repeaters in other countries
Cross band operation between different nodes
at the same repeater site can be made
• 1200 MHz: A (B in Japan)
• 430 MHz: B (A in Japan)
• 144 MHz: C (no D-STAR repeaters in Japan)
3 After entering, push [ENT]
4-33
► Continued on the next page