Home Channel Function; D Home Ch Beep Function - Icom ID-31A PLUS Advanced Manual

12
OTHER FUNCTIONS

Home channel function

Home channels are often-used frequencies you can
preset in the transceiver's VFO mode, Memory mode
and DR function�
D Home channel setting
Example: In the VFO mode
1� Select a mode (VFO or Memory) or the DR screen
in which you want to set the Home channel�
2� Select a frequency, channel, or repeater to be set
as the Home channel�
L On the DR screen, select "FROM�"
3� Push [QUICK]�
4� Select "Home CH Set�"
5� Select "Set Frequency�"
L In the Memory mode, select "Set Channel�" On the
DR screen, select "Set Repeater�"
• Returns to the standby mode�
TIP: Selecting "Clear" in Step 4 clears the Home
channel setting�
[Up]
[ENT]
[Down]

D Home CH Beep function

When the set Home CH is selected by rotating [DIAL],
a beep sounds�
You will know the Home CH selection without looking
at the display�
You can assign the [Home CH] key function to an
optional microphone key� (p� 13-4)
L You can turn OFF the Home CH Beep function on
the MENU screen�
(MENU > Sounds > Home CH Beep)
12-5