Sounds Items - Icom ID-31A PLUS Advanced Manual

11
MENU SCREEN

Sounds items

NOTE: The default settings shown below are for the USA transceiver version� The default settings may differ,
depending on your transceiver version� To return to your transceiver version's default settings, see page 11-3�
Beep Level
MENU > Sounds > Beep Level
Set the beep audio output level to 0 (OFF) or 1
(minimum) ~ 9 (maximum)�
Beep/Vol Level Link
MENU > Sounds > Beep/Vol Level Link
Select whether or not the beep output level can be
adjusted by rotating [VOL]�
• OFF: The output level is fixed to the level set in
Beep Level�
• ON: The output level can be adjusted by rotating
[VOL]�
Key-Touch Beep
MENU > Sounds > Key-Touch Beep
Turn the confirmation beep tones ON or OFF.
• OFF: No beep sounds.
• ON: A beep sounds when you push a key.
Home CH Beep
MENU > Sounds > Home CH Beep
Turn the Home CH Beep ON or OFF�
L In the VFO or Memory mode, when the Home CH
frequency or Home CH Memory channel is selected, the
Home CH Beep sounds�
L In the DR screen, when the Home CH Access repeater is
set to FROM, the Home CH Beep sounds�
• OFF: No beep sounds.
• ON: Sounds a beep when you select the Home CH
by rotating [DIAL]�
Scan Stop Beep
MENU > Sounds > Scan Stop Beep
Turn the scan stop beep ON or OFF�
• OFF: No beep sounds.
• ON: A beep sounds when a scan stops by receiving
a signal�
(Default: 3) Standby Beep
MENU > Sounds > Standby Beep
Turn the Standby Beep function ON or OFF�
This function sounds a beep after a received signal
(Default: OFF)
disappears, in the DV mode�
L The Standby Beep sounds even when Key-Touch Beep
L The Standby Beep output level is depending on the Beep
• OFF: Does not sound a beep after a received signal
• ON: Sounds a beep after a received signal
(Default: ON)
• ON (to me: High Tone):
• ON (to me: Alarm/High Tone):
(Default: ON)
Scope AF Output
MENU > Sounds > Scope AF Output
Select an audio output option during a sweep by the
Band Scope function�
• OFF: No audio is heard during the sweep.
• ON: Audio is heard during the sweep.
(Default: OFF)
11-44
(Default: ON (to me: Alarm/High Tone))
is set to "OFF�"
level setting�
disappears�
disappears�
Sounds a high pitched beep when a received
signal addressed to your call sign (MY)
disappears�
When any other received signal disappears, a
regular beep sounds�
Sounds an alarm (PiRoPiRoPiRo) when a
received signal addressed to your call sign
(MY) disappears�
When any other received signal disappears, a
regular beep sounds�
(Default: ON)