Table of Contents
Advertisement
4
D-STAR OPERATION
Repeater list
You can save repeater information for quick and
simple communication in up to 750 repeaters
(repeater list) in up to 30 Groups
Data must be in the repeater list to use the DR
function
You can add and edit repeater content and groups in
the repeater list
You can enter 4 types of frequencies into the repeater
list, as shown below:
• DV Repeater
• DV Simplex
• FM Repeater
• FM Simplex
TIP:
• For easy operation, the repeater list is preloaded
into your transceiver However, if you do an
All Reset, the CPU deletes all setting data, the
Memory channels, and the repeater list We
recommend that you back up the memory data to
a microSD card or save it to a PC using the
CS-31 PLUS
cloning software
• The repeater list can be downloaded from the Icom
website See D-STAR GUIDE (p 57) in BASIC
MANUAL for details
http://www.icom.co.jp/world/support/download/firm/index.html
D Repeater list contents
The following contents are included in the repeater list:
• TYPE:
Communication type (p 4-33)
• NAME:
Repeater name (p 4-33)
• SUB NAME:
Repeater sub name (p 4-33)
• CALL SIGN:
Repeater call sign and port letter
(p 4-33)
• GW CALL SIGN:
Gateway repeater's call sign and
port "G" (p 4-34)
• GROUP:
Repeater group (p 4-34)
• USE(FROM):
Access repeater use (p 4-34)
• FREQUENCY:
Access repeater's frequency
(p 4-34)
• DUP:
Duplex direction (p. 4-34)
• OFFSET FREQ:
Frequency offset (p 4-34)
• MODE:
Operating mode (p 4-35)
• TONE:
Tone setting (p 4-35)
• REPEATER TONE: Repeater tone (p 4-35)
• POSITION:
Position data accuracy level
(p 4-35)
• LATITUDE:
Latitude of the repeater (p 4-35)
• LONGITUDE:
Longitude of the repeater
(p 4-35)
• UTC OFFSET:
UTC Offset (p 4-36)
4-31
Example: "Hirano" repeater information
Advertisement
Chapters
Table of Contents
