Icom ID-31A PLUS Advanced Manual page 54

4
D-STAR OPERATION
Digital squelch functions
D The Digital Code Squelch setting
1 Push [QUICK]
2 Select "DSQL"
3 Select "CSQLS" or "CSQL"
• CSQLS: Turns ON the Digital Code Squelch
function with the Pocket beep
• CSQL: Turns ON the digital code squelch
function
▼
• "CSQLS" or "CSQL" is displayed
4 Push [MENU]
5 Select "DUP/TONE"
6 Select "Digital Code"
7 Rotate [DIAL] to select a digital code
• When the received signal includes a matching code,
the squelch opens and you can hear the audio
L When the received signal does not include a
matching code, the digital code squelch does not
open However, the S/RF meter displays the signal
level
L To exit the MENU screen, push [MENU].
NOTE: Even if the squelch is closed by the Digital
Code Squelch function, you can receive data in the
DV mode
[Up]
[ENT]
[Down]
D Digital code squelch function with a
Pocket beep
NOTE: Confirm "CSQLS" is selected and
displayed on the screen Do not push any key
or rotate any control after setting Otherwise
"CSQLS" will be canceled
When a received signal matches your digital code,
beeps sound for 30 seconds and "S" blinks, and
the caller's call sign is announced
Within 30 seconds, push [PTT] to answer, or push
[ENT] to stop the beeps and turn OFF the Pocket
beep function
• "S" disappears
L If you make no operation for 30 seconds, the beeps
automatically stop, but "S" continues to blink to
indicate that you received a call
4-30