Voice Tx Function; D Recording The Voice Audio - Icom ID-31A PLUS Advanced Manual

12
OTHER FUNCTIONS

Voice TX function

The Voice TX function transmits the recorded audio
that is on the microSD card, one time or repeatedly,
for up to 10 minutes at the set interval�
This function is convenient to repeatedly call CQ, or
for other events�
You can assign the [Voice TX] key function to an
optional microphone key� (p� 13-4)
NOTE: BE SURE to insert a microSD card into the
transceiver�

D Recording the voice audio

MENU > Voice TX > Record
1� Push [MENU]�
2� Select "Voice TX�"
3� Select "Record�"
▼
4� Hold down [PTT] to record�
Displayed
while
recording
Audio level
L Hold the microphone 5 ~ 10 cm (2 ~ 4 inches) from
your mouth, then speak at your normal voice level�
L The maximum record time is 1 minute.
L Only 1 voice memory can be recorded�
TIP: On the VOICE TX RECORD screen,
push [QUICK], then select "Clear" to clear the
recorded audio�
[Up]
[ENT]
[Down]
Recording
time
5� Push [ENT] to confirm the recorded voice�
• The voice is played back�
L If you hold down [PTT], the recording starts again�
In this case, the previous recorded audio will be
overwritten�
L To exit the MENU screen, push [MENU] several
times�
12-3