ABB ETL600 Instruction Manual page 347

Commissioning Report
Responsible Department: Prepared and tested
PTUKT
Valid for: Derived from:
-
Project
ABB Order No.:
Station
Frequency
Direction
Contents:
ETL600 Commissioning Report
HMI600 Printout of Configuration
The tuning of the equipment is in accordance with the following instructions:
Compatibility Requirements for ETL600
Tuning Instructions for Rx RF Filter P4RX
Tuning Instructions for Tx RF Filter E5TX
Programming and Testing Instructions
Instruction for Changing the Input Voltage of B5LC
APLC Channel Equalization for ETL600
Firmware Download for ETL600
Technical Data ETL600
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to
third parties without express authority is strictly forbidden. © ABB Switzerland Ltd
Form 1KHW001495-EN
ABB Switzerland Ltd
Approved:
Replaces:
-
PLC Equipment
ETL600
Commissioning Report
Part of Commissioning Instructions 1KHW001495
............................................................
............................................................
............................................................
TX = ......... kHz
............................................................
HE
Archive No.:
-
Distribution:
-
Classification-No.: Document No. / File:
-
RX = ......... kHz
C1 to C10
1KHW001490-EN
1KHW001491-EN
1KHW001492-EN
1KHW001493-EN
1KHL015788-EN
1KHW001494-EN
1KHW001496-EN
1KHW001498-EN
Rev. Date:
Lang.: Page:
EN 1/1
Rev. A