Optional Facilities; User Interface Program; Cabinet Type E40A With Accessories; Personal Computer - ABB ETL600 Instruction Manual

ETL600
11.2.2.

Optional facilities

Following is a list of additional facilities which can be ordered with the
equipment.
11.2.2.1.

User Interface Program

The HMI600 software installation program is available on CD-ROM. It
is a Windows based software with the user friendly features of the
Windows environment. Refer to chapter 4 for details about HMI600.
11.2.2.2.

Cabinet type E40A with accessories

The ETL600 can be mounted in the E40A type of cabinet which also
includes various accessories such as rails for mounting terminal
blocks, cable channels etc.
11.2.2.3.

Personal Computer

The PC on which HMI600 is to be installed must provide Windows as
operating system. Refer to section 4.2.1 for system requirements.
11.2.2.4.

PC connection set

This set contains a 9 pole 1:1 serial cable with Sub-D connectors for
connection to the COM-port of the PC. in addition, an USB-to-serial
converter type V9OP is included in case the PC is not equipped with a
COM-port but provides an USB serial interface.
11.2.2.5.

RF connection plate A9CS

The RF connection plate A9CS is available in the following versions:
•
For standard 75 or 125 Ohms unbalanced cable
(2 surge arrestors 800 V)
•
with the hybrid transformer A1AC
(surge arrestor 800 V)
•
with the 3 dB attenuator A1AD
(surge arrestor 800 V)
•
with the impedance transformer A1AE for 150 Ohms balanced
cable (galvanically isolated) or 50 Ohms unbalanced cable
(surge arrestor > 420 V)
11.2.2.6.

Filter tuning set

The set contains the tuning adapters P4LM and P3LL and coaxial
cables for tuning of the ETL600 Rx and Tx filters.
11.2.2.7.

Krone tool kit

The kit contains the tool required to connect wires to the LSA Quick
Plus Connect (Krone) terminal block.
11.2.2.8.

Remote inquiry kit R7AP

The kit contains the interface and cables needed for connecting a PC
to the RS-485 station bus. Refer to section 4.5.1 for a description of
the RS-485 station bus and of the possibilities for remote access to
such a bus.
Options
1KHW001489-EN
November 2005
ABB Switzerland Ltd
11-3