Configuration Of Hmi600; Logon To The Equipment; Connection Via Intranet/Internet And Phone Modems - ABB ETL600 Instruction Manual

ETL600
Baudrate:
Timeout:
Start the server program by pressing the button Start server. By
clicking the minimize button, the SVR600 application window
disappears and the icon SVR appears instead in one of the corners of
the screen. The colour of the icon changes depending on the status of
the SVR600 (stopped, not connected, connected, read/write).
4.4.4.2.2.

Configuration of HMI600

In the dialog box Options / Communications..., select Internet
connection, specify the internet address of the server in the field
Server address, which must be a number of the form n1.n2.n3.n4 with
0 ≤ n1, n2, n3, n4 ≤ 255 or a host name, set the Server Port to 5111
(corresponding to the entry in SVR600) and set the Timeout to
10500ms or higher.
Optionally, by checking the box Allowed clients and clicking the Add
button, a list of client internet addresses can be specified. If this is
done, the server will not process any messages it receives from the
intranet/internet unless they are generated by one of the clients in the
list. That way, unauthorized access to the ETL600 from unknown
clients is not possible.
Click OK to accept the settings.
4.4.4.3.

Logon to the equipment

Refer to section 4.4.2.3. The Logon procedure is identical to the one
for direct connection via cable.
4.4.5.

Connection via intranet/internet and phone modems

HMI600 can communicate with ETL600 via internet/intranet and phone
modems.
Substation
RS232
ETL600
connection Dial up
modem
Fig. 4-4
User Interface Program
1KHW001489-EN
57'600 Bd
10'000 seconds
Main control center
HMI600
Ethernet
connection
PSTN
Telephone
(Public
line
Switched
Telephone
Network)
Communication via intranet/internet and phone modems
ABB Switzerland Ltd
Internet,
Intranet,
LAN,
WAN
Regional control center
Telephone
Dial up
line
modem
November 2005
Ethernet
connection
RS232
connection
SVR600
4-9