ABB ETL600 Instruction Manual page 307

Factory Settings and Routine Tests
Responsible Department: Prepared and tested
PTUKT
Valid for: Derived from:
-
Project
ABB Order No.:
Station
Frequency
Direction
Contents:
ETL600 System Settings
ETL600 System Test Report
HMI600 Printout of Configuration
The tuning of the equipment is in accordance with the following instructions:
Compatibility Requirements for ETL600
Tuning Instructions for Rx RF Filter P4RX
Tuning Instructions for Tx RF Filter E5TX
Instruction for Changing the Input Voltage of B5LC
APLC Channel Equalization for ETL600
Firmware Download for ETL600
Technical Data ETL600
We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to
third parties without express authority is strictly forbidden. © ABB Switzerland Ltd
Form 1KHW001493-EN
ABB Switzerland Ltd
Approved:
Replaces:
-
PLC Equipment
Factory Settings and Routine Tests
Part of Programming and Testing Instructions 1KHW001493
............................................................
............................................................
............................................................
TX = ......... kHz
............................................................
Distribution:
-
Classification-No.:
-
ETL600
RX = ......... kHz
HE
Archive No.: Rev.
-
Lang.:
EN
Document No. / File:
A1 to A4
B1 to B11
1KHW001490-EN
1KHW001491-EN
1KHW001492-EN
1KHL015788-EN
1KHW001494-EN
1KHW001496-EN
1KHW001498-EN
Date:
Page:
1/1
Rev. A