Setting The Pf Key; Pf Setting (Function Key) - Omron E5CC User Manual

5-18 Setting the PF Key

5-18-1 PF Setting (Function Key)

PF Setting (Advanced
Function Setting Level)
pf
shft
Set value Display
off
OFF
run
RUN
stop
STOP
r-s
R-S
at-2
AT-2
at-1
AT-1
lat
LAT
a-m
A-M
pfdp
PFDP
shft
SHFT
*1 When AT cancel is specified, it means that AT is cancelled regardless of whether the AT currently being
executed is 100% AT or 40% AT.
*2 Alarms 1 to 4, the HB alarm, and the HS alarm are cancelled.
*3 For details on auto/manual operations using the PF Key, refer to 5-12 Performing Manual Control.
*4 AT-1 can be set for heating/cooling control or for floating position-proportional control, but the setting will be
disabled.
Note1: Pressing the PF Key for at least one second executes operation according to the set value.
(However, if Digit Shift is set, operation will be in less than one second.) When the Monitor/Setting
Item parameter is selected, however, the display is changed in order from Monitor/Setting Item 1 to 5
each time the key is pressed.
2: This function is enabled when PF Key Protect is OFF.
E5@C Digital Temperature Controllers User's Manual (H174)
• Pressing the PF Key for at least one second executes the operation set in the
PF Setting parameter. The default is shft (digit shift).
Setting
Disabled Does not operate as a function key.
RUN Specifies RUN status.
STOP Specifies STOP status.
RUN/STOP reverse Specifies reversing the RUN/STOP operation status.
operation
100% AT Specifies reversing the 100% AT Execute/Cancel status.*1
Execute/Cancel
40% AT Specifies reversing the 40% AT Execute/Cancel status.*1 *4
Execute/Cancel
Alarm Latch Cancel Specifies canceling all alarm latches.*2
Auto/Manual Specifies reversing the Auto/Manual status.*3
Monitor/Setting Item Specifies the monitor/setting item display. Select the monitor
setting item according to the Monitor/Setting Item 1 to 5
parameters (Advanced Function Setting Level).
Operates as a Digit Shift Key when settings are being
Digit Shift
changed.
5 Advanced Operations
Function
5
5 - 51