Omron E5CC User Manual page 73

3
Set the control method.
Press the O
(Level) Key for at
least 3 seconds.
Standard Models
ON/OFF Control
Press the M (Mode)
Key several times to
display cntl (CNTL).
PID Control
Position-proportional Models
Close/Floating Control
E5@C Digital Temperature Controllers User's Manual (H174)
Operation Level Operation Level
25
The display flashes.
0
Initial Setting Level
cntl
onof
cntl
Initial Setting Level
pid
Initial Setting Level
clfl
flot
3 Part Names and Basic Procedures
Initial Setting Level Initial Setting Level
in-t
in-t (IN-T) will be displayed
to show that the Initial Setting
5
Level has been entered.
cntl (CNTL): Indicates the control method.
The default setting is onof (ONOF: ON/OFF control).
If pid (PID control) is displayed, press
the D (Down) Key to change to onof
(ONOF) (ON/OFF control).
cntl (CNTL): Indicates the control method.
If onof (ON/OFF control) is displayed, press
the U (Up) Key to change to pid (PID) (PID
control).
Indicates either close
clfl (CLFL):
or floating control.
3
3 - 13