Omron E5CC User Manual page 285

pvdp
The display below the decimal point in the PV can be hidden for temperature inputs.
• The PV decimals below the decimal point can be hidden by setting the PV Decimal Point
Display parameter to OFF. When this parameter is set to ON, the display below the
decimal point will appear according to the input type setting.
Function
Setting
Related Parameters
See See
Input Type (Initial Setting Level): Page 6-42
pvst
• This parameter sets a control or alarm status that is displayed alternately in 0.5-s cycles
on the No. 1 display when the PV is set to be displayed in the No. 1 display.
• PV
Function
• PV/SP*
• PV/Manual MV (Valve Opening)
• PV/SP/Manual MV (Valve Opening)
*
off:
Setting
manu:
stop:
alm1:
alm2:
alm3:
alm4:
alm:
ha:
Related Parameters
See
See
Process Value/Set Point (Operation Level): Page 6-8
PV/MV (Manual MV) (Manual Control Level): Page 6-40
E5@C Digital Temperature Controllers User's Manual (H174)
PV Decimal Point Display
Setting range Default
on: ON, off: OFF
PV Status Display Function
This includes when the PV/SP is selected for the Monitor/Setting Item parameter.
No PV status display
MANU is alternately displayed during manual control.
STOP is alternately displayed while operation is stopped.
ALM1 is alternately displayed during Alarm 1 status.
ALM2 is alternately displayed during Alarm 2 status.
ALM3 is alternately displayed during Alarm 3 status.
ALM4 is alternately displayed during Alarm 4 status.
ALM is alternately displayed when Alarm 1, 2, 3, or 4 is set to ON.
HA is alternately displayed when an HB alarm or HS alarm is ON.
000 The input type must be set for a temperature input.
ON
Setting range
6 Parameters
6
Default
off
6 - 89