Omron E5CC User Manual page 84

4 Basic Operation
Moving to the Advanced Function Setting Level after Clearing
Protection
After you have set the icpt (Initial Setting/Communications Protect) parameter to 0 (enable moving
to Advanced Function Setting Level), select amov (Move to Advanced Function Setting Level) in the
Initial Setting Level.
Moving to the Advanced Function Setting Level
1
Press the O Key for at least 3 seconds in the Operation Level.
The No. 1 display will flash when the key is pressed for 1 s or
longer. The display will change from the Operation Level to the
Initial Setting Level.
2
Press the M Key several times in the Initial Setting Level to
display amoV (Move to Advanced Function Setting Level).
3
Press the D and U Keys at the Move to Advanced Function
Setting Level parameter and then enter -169.
You can hold the U (Up) or D (Down) Key to increment or decrement
*
the set value quickly.
4
Press M Key once or wait for 2 seconds or longer without
doing anything.
The display will change to the Advanced Function Setting Level.
Moving from the Advanced Function Setting Level to the Operation Level
1
Press the O Key for at least 1 second in the Advanced
Function Setting Level.
The display will change from the Advanced Function Setting Level
to the Initial Setting Level.
2
Press the O Key for at least 1 second in the Initial Setting
Level.
The display will change from the Initial Setting Level to the
Operation Level.
4 - 6
Operation Level
25
Initial Setting Level
in-t
Initial Setting Level
amov
amov
-169
Advanced Function Setting
Level
init
off
Advanced Function Setting
Level
init
off
Initial Setting Level
in-t
Operation Level
25
E5@C Digital Temperature Controllers User's Manual (H174)
0
Input Type
5
Move to Advanced
Function Setting
Level
0
Move to Advanced
Function Setting Level
−169: Password to
move to Advanced
Function Setting Level
Parameter
Initialization
Input Type
5
PV/SP
0