Omron E5CC User Manual page 265

prlt
• This parameter sets the key pressing time required to move to the Protect Level from the
Operation Level, the Adjustment Level, or Monitor/Setting Item Level.
Function
Setting
cjc
• This parameter specifies whether cold junction compensation is to be performed
internally by the Controller or to be performed externally when the input type setting is 5
to 24.
Function
• The cold junction compensation external setting is enabled when the temperature
difference is measured using two thermocouples or two ES1B Sensors.
Setting
Related Parameters
See
See
Input Type (Initial Setting Level): Page 6-42
E5@C Digital Temperature Controllers User's Manual (H174)
Move to Protect Level Time
Setting range
1 to 30 Seconds
Cold Junction Compensation
Method
Setting range
on: Internally, off: Externally
Unit Default
3
Input type must be thermocouple or infrared
temperature sensor
Default
on
6 Parameters
6
6 - 69