Configuring Ipv6 Mbgp Route Redistribution; Configuring Ipv6 Mbgp Route Summarization; Advertising A Default Route To A Peer Or Peer Group - HP A5500 SI Switch Series Configuration Manual

Configuring IPv6 MBGP route redistribution

Follow these steps to configure IPv6 MBGP route redistribution:
To do...
Enter system view
Enter BGP view
Enter IPv6 MBGP multicast
address family view
Enable default route redistribution
into the IPv6 MBGP routing table
Enable route redistribution from
another routing protocol
NOTE:
If the default-route imported command is not configured, using the import-route command cannot
redistribute any IGP default route.

Configuring IPv6 MBGP route summarization

To reduce the routing table size on medium and large BGP networks, you must configure route
summarization on IPv6 MBGP routers. BGP supports only manual summarization of IPv6 multicast routes.
Follow these steps to configure IPv6 MBGP route summarization:
To do...
Enter system view
Enter BGP view
Enter IPv6 MBGP address family
view
Configure manual route
summarization

Advertising a default route to a peer or peer group

Follow these steps to advertise a default route to a peer or peer group
To do...
Enter system view
Use the command...
system-view
bgp as-number
ipv6-family multicast
default-route imported
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Use the command...
system-view
bgp as-number
ipv6-family multicast
aggregate ipv6-address prefix-length [ as-set
| attribute-policy route-policy-name | detail-
suppressed | origin-policy route-policy-name
| suppress-policy route-policy-name ]*
Use the command...
system-view
409
Description
—
—
—
Optional
By default, default route
redistribution is not allowed.
Required
Not enabled by default
Remarks
—
—
—
Required
Not configured by
default
Remarks
—