External Paging - Panasonic KX-T336 System Reference Manual

Description of Assigning Items
Trunk Group Access
Trunk Group (01 to 16)
Special Carrier Access
EQA (1 to 4) OCC (1 to 4)
Station Paging Access
PGA (1 to 8)
External Paging (1 and 2)
Conditions
Special Carrier Access
Station Paging Access

External Paging

To select this screen, press the NEXT key in the "System-Class of Service (1/2)"
screen.
Pressing the TAB key moves the cursor as follows:
When set to "Yes," the associated trunk group is available during direct
trunk group access. When set to "No" the trunk group is not available
during direct trunk group access.
When set to "Yes" the Equal Access trunk group and OCC Access trunk
group are available during virtual trunk group access. When set to
"No," the Equal Access trunk group and OCC access trunk groups are
not available during virtual trunk group access.
Assigns which paging groups are available for access.
Assigns which external pagers are available for access.
If "Y" is selected but if "Special Carrier Access-Equal Access", Service
and "Special Carrier Access-OCC Access", Service are set to "No,"
Special Carrier Access via virtual trunk group access does not work.
It is administrable to activate or deactivate the EQU access and/or OCC
access features on a system-wide basis.
Refer to Section 10-C-52 "World Select 2 (WS2)" for further information.
If an extension does not belong to the same tenant as the paging groups
assigned to "Y," the extension cannot access the paging groups.
If "Y" is selected but if "System-Operation" External Paging 1/2 is set to
"No," paging through external pagers is impossible. If an extension
belongs to the different tenant from the tenant of the External Paging 1
or 2 assigned to "Y," the extension cannot access the external pager.
cursor
9-D-29
(60395)