7.00 Changing DISA User Code
This is used to change the DISA user code.
For further information about DISA feature, refer
Operation
1. Set PITS system program-
ming mode.
2. Dial "0 5." (program number)
3. Dial DISA code number (1
to 8).
4. Dial DISA user code: four
digits.
5. Press the MEMORY button
to store the code.
to Section 3-D-2.02 "Direct Inward System
Access (DISA)."
Result
•The following message appears
on the display:
SYS-PGM No?
•The MEMORY button indicator
lights in red.
•A message appears on the
display and requires you to enter
the DISA code number:
DISA CD No?
•The MEMORY button indicator
light goes out.
•Current user code of the selected
DISA code number appears on
the display:
<Example>
USR CD 8 : 1234
8
: DISA code number
1234 : DISA user code
•If nothing is stored:
USR CD 8 :
• Dialed digits appear on the
display:
USR CD 8 : 5555
• The MEMORY button indicator
lights in red.
• Confirmation tone sounds.
11-C-16
Comment/Note
• Refer to Section 11-C-1.00
"Entering PITS System
Programming Mode."
• Digits 0 through 9 can be
entered as the DISA user code.