Panasonic KX-T336 System Reference Manual page 486

8.00 Uniform Call Distribution
(UCD)-Log Out
Description
UCD group members may leave the group
temporarily by dialing the feature number for
"UCD Log Out" or using the programmable UCD
Log In button to prevent UCD calls being sent to
their extensions.
Refer to Section 3-D-2.05 "Uniform Call
Distribution (UCD)-without OGM" and Section
3-D-2.06 "Uniform Call Distribution (UCD)-with
OGM."
Programming
System Programming
"System-Numbering Plan (09/11)",
UCD Log In
UCD Log Out
"Extension-Station (2/3)",
DN Key Type,
"Extension-Station (3/3)",
DSS Key Type
Condition
To set or cancel UCD Log Out, use the PDN
button.
When an extension of the UCD group set forLog
Out goes off-hook, dial tone 4 below can be
heard.
(second) 0 1 2
Reference
VT Dumb
9-D-6.09 10-C-10.00
9-G-1.02 10-C-24.00
9-G-1.03 10-C-26.00
3 4 5
4-D-17
(70695)
Operation
Setting UCD Log Out (1)
1. Lift the handset or press the SP-
PHONE button.
• You hear dial tone 1 or 3 or 4.
2. Dial the feature number for UCD
Log Out "#0" (default).
• You hear confirmation tone 1 or
2.
• If your PITS has a display, it
shows:
UCD Logout
3. Replace the handset or press the
SP-PHONE button.
Setting UCD Log Out (2)
1. Lift the handset or press the SP-
PHONE button.
• You hear dial tone 1 or 3 or 4.
2. Press the UCD Log In button.
• You hear confirmation tone 1 or
2.
The indicator on the UCD Log
In button lights in red.
• If your PITS has a display, it
shows:
UCD Logout
3. Replace the handset or press the
SP-PHONE button.