Panasonic KX-T336 System Reference Manual page 1031

Description of Assigning Items
Telephone Type
Model
OHCA Circuit
Primary Directory Number
Intercom Number
Station Name
ICM Group
Pickup Group
Next Hunt Station
Class of Service
Data Line Security
Automatic Callback-Trunk
Parallel Connect
Message Waiting Indication Assigns whether a Single Line Telephone with MESSAGE lamp can
Conditions
This screen cannot be selected from Extension-submenu screen if "System-Configuration", Slot Assign-
ment does not have any of extension cards (PLC, SLC, HLC, OPX) programmed or if "System-Configura-
tion", DN Assignment does not have the extension number programmed.
If PITS telephone KX-T123230D is connected, select KX-T123235 (7130) for PITS Model. PITS KX-
T123230D is functionally equivalent to KX-T123235 and KX-T7130.
If PITS telephone KX-T7130 is connected, select KX-T123235 (7130) for PITS Model.
If PITS telephone KX-T7320 is connected, select KX-T7020 for PITS Model.
If PITS telephone KX-T7330 is connected, select KX-T7030 for PITS Model.
If PITS telephone KX-T7350 is connected, select KX-T7050 for PITS Model.
Selects the telephone type to be connected.
Selects the model number when PITS is set as the telephone type in the
above item.
Determines whether the selected phone supports OHCA or not.
When a "DN" is assigned in the Configuration-DN Assignment screen,
the PDN (Primary Directory Number) is assigned automatically. It is
possible to select a new PDN provided it matches the numbering plan
and there is no conflict.
Assigns an intercom number. This field is optional.
Assigns the station name of the extension. This is displayed on the CRT
display of Attendant Console and display of PITS telephone (if provided).
Assigns the intercom group number of the extension.
Assigns the pickup group number of the extension. This item is optional.
Assigns the next hunting destination in the hunting sequence. This item
is optional.
Assigns the COS (Class of Service) level for the extension.
Assigns whether "Data Line Security mode" is available or not.
When set to "No," setting "Data Line Security mode" by dialing the
feature number is impossible.
Assigns whether the Automatic Callback-Trunk feature is available or
not.
Assigns whether the Parallel connection of PITS and SLT is available or
not.
receive the message waiting indication or not.
9-G-3
(70695)