Panasonic KX-T336 System Reference Manual page 1425

G. Clear Mode
Description Used to clear the entire database programmed in the attendant
console local mode.
Input Format $ CLEAR
Display Example
When "Data Clear OK ? (Y/N)" appears, press "Y" then the
RETURN key to clear the data.
If you do not clear, press "N" then the RETURN key.
After the above operation, prompt "$" is displayed on the screen
and you can enter the desired mode by entering the appropriate
command.
Conditions The followings are cleared by executing this command:
Displayed Message
$ CLEAR
* * * * * Data Clear OK ? (Y/N) => Y
* * * * * Data Clear complete
$
(1) (2) (3)
DIC ( ) SPD ( ) DIG (
C R C R
• All entries in the Extension Directory
(same as if DIC > DELETE * /* /* )
• All entries in the Speed Dial Dictionary
(same as if SPD > DELETE * /* )
• All extension numbers in the BLF screen
Displayed Message
* * * * * Error: Illegal main command
* * * * * Error: Illegal sub command
* * * * * Data Clear OK ? (Y?N) =>
* * * * * Data Clear complete
* * * * * Data Clear abort
(4) (5)
) BUP ( ) HELP ( )
C R C R C R
There is an error in the main command.
There is an error in the sub command.
Confirmation message.
Clear is completed.
Data is not cleared.
13-G-1
(6) (7) (8)
CLEAR (
C R
Meaning
)