Panasonic KX-T336 System Reference Manual page 1120

2.00 Error Messages Related to
the Assigning Items in the
Other Screens
If there is a wrong entry related to the assigning
items in the other screens, the following appears
on the message line when storing the entry:
"Contradict the relative item external (xxx)."
Error Message No.
010 Setting DN which is not stored in the hundred
block.
011 Specified extension DN is not stored.
012 Telephone type of the extension paired with
DSS console is not PITS.
020 Setting DN to the DSS button.
030 Setting trunk group except DID on CO-line on
DID card. Or, assigning trunk group of DID to
CO-line on the card except DID.
040 Tenant is different.
041 As assigned to the destination of 1 : N of trunk
group, impossible to change tenant.
042 As assigned to the destination of doorphone
call, impossible to change tenant.
043 Setting one pickup group to ICM & PAG group
belonging to different tenant.
044 Changing tenant of ICM/PAG group without
canceling extensions.
045 As assigned to the destination of paging from
attendant console, impossible to change Tenant.
046 As assigned to call placing mode of Trunk
group, impossible to change Tenant.
047 As assigned to night answer point for CO-line,
impossible to change Tenant.
048 Attempting to change the tenant of Trunk group
without removing the CO lines which belong to
the trunk group.
049 Attempting to change the tenant of Trunk group
without canceling the setting of 1:N destination
for the trunk group.
050 Deleting is impossible because it is assigned in
another item.
The (XXX) indicates an error message number
shown below and possible causes of the errors
and countermeasures for them are as follows.
Probable Cause
9-M-2
(70695)
Countermeasure
Enter data in hundred block. Or, set DN
which is stored in hundred block.
Store the extension DN.
Paired extension should be changed to a
PITS.
Set DN to assignable port.
Assign trunk group to the correct kind of
card.
Assign the same tenant.
Cancel the 1 : N destination.
Cancel the doorphone call destination.
Set it to the same tenant. Or, change tenant
after deleting pickup group.
Change after canceling extensions.
Impossible to move extensions to the other
tenant.
Change the destination of attendant paging.
Change assigning of incoming mode.
Change assignment of night answer point.
Change after removing the CO lines.
Impossible to move CO lines to the other
tenant.
Change after canceling 1: N destination.
Change the item beforehand.