Panasonic KX-T336 System Reference Manual page 1214

49.00 CPC Signal Detect Timing-
Outgoing CO Calls (CPC)
Description
CPC command is used to make CPC (Calling Party Control) signal detection
effect on outgoing CO calls as well as on incoming CO calls.
Refer to Section 3-F-7.00 "Calling Party Control (CPC) Signal Detection" for
further information.
(Password level: Three or higher)
Input Format
Mode
C P C
Index Number
Index Number
1011 to 3158
Input Value for Item Number
I t e m
Assigning Items
N u m b e r
N o n e
CPC signal detect timing
(for outgoing CO calls)
Conditions
Some switching system of central office may send CPC-like signal in dialing
sequence and the attempt of making a call may be terminated.
If your switching system does not send CPC-like signal in dialing sequence,
we recommend to make CPC signal detection work on outgoing CO calls.
CPC signal detection can be assigned to incoming CO calls only or both on
incoming and outgoing CO calls. If CPC signal detection is assigned to
outgoing CO calls only, it does not function.
Index Number CR
00 : CPC signal is not detected
01 : 6.5 ms
02 : 16 ms (8 N ms N=2 to 75)
•
•
•
75 : 600 ms
(Default = 00)
10-C-75
Explanation
Physical Number of the Trunk Port
Input Value