6.00 Changing PITS
Programming Password
The following operation is used to change the PITS
programming password which is required to enter
into PITS system programming mode.
Operation
1. Set PITS system program-
ming mode.
2. Dial "0 4." (program number)
3. Dial new password: four
digits.
4. Press the MEMORY button
to store the entry.
Result
• The message appears on the
display:
SYS-PGM No?
• The
button indicator
MEMORY
lights in red.
• Current password appears on
the display.
<Example>
System PW: 1111
• The MEMORY button indicator
light goes out.
• Dialed password appears on
the display.
<Example>
System PW: 5555
• The MEMORY button indicator
lights in red.
• Confirmation tone sounds.
11-C-14
Comment/Note
• Refer to Section 11-C-1.00
"Setting PITS System
Programming Mode."
• Values from 0 to 9, *, # can be
entered.