Panasonic KX-T336 System Reference Manual page 616

D. Transferring Features
1.00 Call Transfer
Description
Transfer is convenient to redirect a call to another
place. Attendant assistance is not required and
the caller does not have to redial.
SLT Transfer Operation
When SLT Transfer Operation mode is set to
"Mode 2", an SLT user can transfer a call to an
outside party.
Reference
• Section 5-D-1.06 "Screened call Transfer to
Trunk"
• Section 10-C-53.00 "World Select 3"
1.01 Unscreened Call Transfer to
Station
Description
Allows an extension user to transfer calls (both
extension and outside calls) to another extension
without announcement.
Programming
System Programming
"World Select 3 (WS3)"
SLT Transfer Operation
Conditions
If transferred call is not answered by the
destination party, it will receive one of the
following treatments.
Status of Destination
Able to receive the
call
(sending ringback
tone)
Busy
(sending busy tone)
Setting Do Not
Disturb
(sending DND tone)
1 When the originator of transfer answers the call,
conversation between the originator and the
transferred party starts.
The extension users can not transfer the
following calls.
• A call with Attendant Console
• A call with Doorphone
5-D-1
(70695)
Reference
VT Dumb
— 10-C-53.00
Operation Resulted
Performs the call to the destination for
a specific period. In case of no
answer, interrupts ringing and starts
ringing to the originator of transfer.
For detail, refer to Section 3-E-3.00
"Transfer Recall."
As soon as the destination goes on-
hook, starts calling the destination
(Camp-on Transfer).
If the destination party remains busy or
does not answer the call within a
specified period, starts calling back the
originator of transfer. 1
For detail, refer to Section 3-E-3.00
"Transfer Recall."
Unscreened Call Transfer to extension
is ineffective.
Transferred party is treated simply as a
party placed on Consultation Hold.
Hanging up causes the Consultation
Hold Recall to the originator of transfer.
1