9.00 Electronic Station Lock Out
Description
Electronic Station Lock Out allows an extension
user to prohibit other extension users from making
outgoing CO calls from his or her extension.
Any three-digit number (000 to 999) can be used
as a lock code.
To execute this function, assign "System-Class of
Service", Station Lock to "Yes."
Programming
System Programming
"System-Class of Service (1/2)",
Station Lock
"System-Numbering Plan
(07/11)",
Station Lock Set
Station Lock Cancel
Conditions
Set and cancel Electronic Station Lock Out on the
PDN button.
Both Operator 1 and 2 (extension user or
Attendant Console) can lock and unlock the other
extensions remotely without dialing the lock code
as shown in the following format.
[Remote Station Lock cancel + Extension no.]
Once locked by an Operator, the extension user
cannot unlock it.
See Section 4-I-11.00 "Remote Station Feature
Control" for the details.
Reference
VT
Dumb
9-D-4.01
10-C-7.00
9-D-6.07
10-C-10.00
4-I-18
(70695)
Operation
Setting Electronic Station Lock Out
1. Lift the handset or press the SP-
PHONE button.
2. Dial the feature number for Station
Lock Set "
3. Dial the lock code: 000 to 999.
4. Dial the same lock code again.
• You hear confirmation tone 2.
• If your PITS has a display, it
shows:
Locked No. : xxx
5. Replace the handset.
Canceling Electronic Station Lock Out
1. Lift the handset or press the SP-
PHONE button.
2. Dial the feature number for Station
Lock Cancel "#6" (default).
3. Dial the lock code.
• You hear confirmation tone 2.
• If your PITS has a display, it
shows:
Unlocked
4. Replace the handset.
6" (default).
lock code