4. Press the switchhook for
approximately one half second
and release it after the third party
answers.
• You hear confirmation tone 3.
• A three-party conference is
now established.
Note:
If the conference trunk is not available in step 3,
you cannot establish conference by pressing the
switchhook, which puts the third party on
Consultation Hold, and conversation with the
held party starts.
Concluding a conference
1. Replace the handset.
• The other two parties may
continue their conversation.
• If the other two parties are both
outside parties, they will be
disconnected.
Talking to the original party while holding the third
party
1. Press the switchhook for
approximately one half second
and release it.
• You hear confirmation tone.
• You can talk to the original
party.
5-E-1-1
(70695)