Panasonic KX-T336 System Reference Manual page 1122

Error Message No.
104 Attempting to delete the extension which is
registered as an ATT overflow extension for
Trunk group.
105 Attempting to delete the extension which is
registered as an overflow extension for UCD
group.
106 Attempting to delete the extension/RMT which
is registered as a DIL 1:1 call destination of CO
line.
107 Attempting to delete the extension which is
registered as a night answer point of CO line.
108 Attempting to delete the extension which is
registered as a walking station.
109 Attempting to delete the PITS paired with DSS-
console.
110 Attempting to delete the extension which is
registered as a night answer point for tenant.
111 Attempting to delete the extension which is set
to SDN.
113 Attempting to delete the ATT when the ATT is
assigned for day incoming mode in Trunk
group.
114 Attempting to delete RMT when the RMT alarm
is assigned.
115 Attempting to delete the external pager which is
registered as UNA point for CO line.
116 Attempting to delete the external pager which is
registered as a TAFAS for day/night incoming
mode for Trunk group.
117 Attempting to delete the external pager which is
registered as a paging destination for the ATT.
118 Attempting to delete the ATT which is specified
for maintenance device.
119 When deleting ATT, combination of operators 1
and 2 is incorrect.
121 Impossible to delete the card, for all of the ports
belonging to the card is not made pre-installed.
122 Impossible to delete the card, for DN is
assigned to an extension port.
Probable Cause
9-M-4
(70695)
Countermeasure
Cancel the storage as an ATT overflow
extension.
Cancel the storage as an overflow
destination.
Cancel the storage as a DIL 1:1 call
destination.
Cancel the storage as a night answer point.
Cancel the storage as a walking station.
Change the PITS paired with DSS Console.
Cancel the storage as night answer point.
Cancel the assignment of SDN.
Change the incoming mode destination other
than ATT.
Cancel the assignment of RMT alarm.
Change the night answer point.
Change the incoming mode.
Change the paging destination.
After changing maintenance device, delete
the ATT.
Check the combination of operators.
Delete all the ports belonging to the card.
Delete all the ports belonging to the card.