Panasonic KX-T336 System Reference Manual page 1316

Operation chart for changing DISA user code
<Status 1>
<Status 2>
Note:
Pressing the END button in any status after <Status 1>
restores <Status 1>.
Pressing the SELECT button in any status after <Status 2>
restores <Status 2>.
You can also advance to the next DISA code number
by pressing the NEXT button and return to the previous
DISA code number by pressing the PREV button.
PITS system programming
mode
SYS-PGM No?
Initial display for PITS system
programming mode
DISA CD No?
The MEMORY button indicator light
goes out.
Current user code appears on the
display.
Dialed code appears on the display.
Confirmation tone sounds.
The MEMORY button indicator lights in
red.
11-C-17
Dial "0 5."
• To designate the DISA code number, dial
one digit: 1 to 8.
• To designate the DISA code number 1,
press the NEXT button.
• To designate the DISA code number 8,
press the NEXT button and then the PREV
button.
• To enter or change the DISA user code,
dial the new DISA user code: four digits.
• To correct an error entry, press the CLEAR
button and dial again.
•
• Press the MEMORY button to store the
code.
•
• Press the NEXT button to advance to the
next DISA code number.
• Press the PREV button to return to the
previous DISA code number.
• The MEMORY button indicator light goes
out.
Operation
Result due to
the operation