Panasonic KX-T336 System Reference Manual page 798

Operation
Recording OGM
1. Press an idle LOOP key.
LOOP
• The SRC indicator lights and
dial tone sounds.
2. Dial the feature number for OGM
Record "791" (default) and the
resource number (1 to 4) in
succession.
(Resource number)
1 : OGM1 for UCD
2 : OGM2 for UCD
3 : OGM for DISA
4 : OGM for W-UP (Wake-up)
• The following message appears
on the screen and confirmation
tone sounds.
Message: xxxxxxxx recording: 00 sec
3. Begin your message.
4. Dial "#" to conclude recording.
• Playback starts automatically
through the handset or headset,
the following message appears
on the screen.
Message: xxxxxxxx playing: 00 sec
• After playback finishes, the
SRC indicator remains lit, and
no tone sounds.
(Supplement)
In step 3 if 30 seconds is over, recording is
terminated and playback starts automatically.
Accordingly, it is not necessary to execute step 4
afterward.
In step 3, if you wish to change the message
during recording, you can start recording again by
dialing "* ."
In Step 4, if you wish to interrupt and finish
playback, dial "#."
UCD-OGM1 or
UCD-OGM2 or
DISA-OGM or
Wake Up OGM
6-J-20
(40993)
Playing back OGM
1. Press an idle LOOP key.
LOOP
• The SRC indicator lights and
dial tone sounds.
2. Dial the feature number for OGM
Playback "792" (default) and a
number below in succession.
(Resource number)
1 : OGM1 for UCD
2 : OGM2 for UCD
3 : OGM for DISA
4 : OGM for W-UP (Wake-up)
("* " and DISA No.)
* 1 : selects Card 1
* 2 : selects Card 2
* 3 : selects Card 3
* 4 : selects Card 4
• The following message
appears on the screen. After
confirmation tone sounds,
playback starts.
Message: xxxxxxxx playing: 00 sec
• After playback finishes, the
SRC indicator remains lit, and
no tone sounds.
(Supplement)
In step 2, if you wish to interrupt and finish
playback, press "#."
During playback you can start playback again
from the beginning by dialing "* ."
UCD-OGM1 or
UCD-OGM2 or
DISA-OGM or
Wake Up OGM