Panasonic KX-T336 System Reference Manual page 1330

Operation
3. To change the preset
feature, dial the program
number corresponding to the
desired feature.
• To assign DSS (DN) feature,
1) Dial "1."
2) Dial a directory number
(three or four digits).
• To assign DSS (ICM)
feature,
1) Dial "2."
2) Dial an ICM number (one
or two digit(s)).
Result
1) The following message
appears on the display.
DSS(DN):
2) The dialed number appears
on the display.
<Example>
DSS(DN):100
1) The following message
appears on the display.
DSS(ICM):
2) The dialed number appears
on the display.
<Example>
DSS(ICM):11
12-C-3
Comment/Note
<Example>
Message Waiting
(Message Waiting)
<Example>
CO:P 1011
(Single CO)
<Example>
Trunk Group:11
(Group CO)
• If no feature is assigned to the
DN button, the following
message appears on the
display :
Not Stored
• If the dialed number does not
exist as a directory number,
alarm tone sounds.
• If you want to clear a wrong
entry, press the CLEAR button
and dial the correct number.
• If the dialed number does not
exist as an ICM number, alarm
tone sounds.
• If you want to clear a wrong
entry, press the CLEAR button
and dial the correct number.
Continued
Continued