Table of Contents
Advertisement
980 DP 1.4 Video Generator / Analyzer - User Guide
Rev. A1
3.10 Testing audio on an audio rendering device
The 980 DP 1.4 Video Generator / Analyzer module supports audio testing for sink audio rendering devices. You
can output LPCM audio over 8 channels at user selectable sampling rates, bits per sample. The audio signal is a
sine wave. You can also specify the amplitude and the frequency of the sine wave. You can also specify the
amplitude and frequency of each channel separately. Use the following procedures to test a DP audio rendering
device.
Note: When testing MST-capable audio rendering devices, the audio signal that you specify will be transmitted to
all downstream MST sinks.
To test an audio rendering device:
1. From the main window of the 980 DP Video Generator module, select the Audio tab.
The audio tab interface appears as shown below.
Page 46
June 16, 2017
Advertisement
Table of Contents
