Creating A New Format Using The Format Editor - Teledyne 980 DP1.4 User Manual

980 DP 1.4 Video Generator / Analyzer - User Guide

10.8 Creating a new format using the Format Editor

The procedure below describes how to create a new format using the Format Editor.
To create a new format using the Format Editor:
1. Access the Format Editor using the procedures described in
The Format Editor appears.
3. Click the New activation button on the bottom of the panel (indicated above).
The Timing tab of the format definition page appears as shown below.
Page 216
Accessing the Format Editor.
Rev. A1
June 16, 2017