Table of Contents
Advertisement
980 DP 1.4 Video Generator / Analyzer - User Guide
14 Command Reference
This section provides a list of commands available for use with the 980 HDMI Video Generator module. You can
control the 980 and its modules through the command line via a telnet session or from the 980 Manager Console
panel. Typically users will utilize a terminal program such as PuTTY.
15.1 Accessing the Command Line
To establish a command line session through a telnet session:
1. Launch the Command Prompt utility from the Windows Accessories such as PuTTY. Enter
2. Establish a telnet session with the 980 using the following command. Note you will enter in the IP address of
the 980 (192.168.254.135 in example)
The 980 login prompt will then appear as shown below.
Page 296
Rev. A1
June 16, 2017
Advertisement
Table of Contents
