980 DP 1.4 Video Generator / Analyzer - User Guide
12.4 Configuring the 980 DP Protocol Analyzer with an EDID
Use the procedures below to provision the 980 DP Protocol Analyzer Rx port with an EDID to emulate a sink
device.
To provision the EDID:
1. (optional) Load the EDID to use in the 980 DP Video Generator / Analyzer. This is the EDID that the module
will be emulating on its Rx port.
The default EDID in the 980 DP Protocol Analyzer Rx has a preferred timing of 1080p60 with a maximum
TMDS rate of 165MHz. You can provision the module with a different EDID. Sample EDIDs are available from
the Quantum Data website on the downloads page
(http://www.quantumdata.com/support/980readme.asp#edid). You can download these EDIDs to the host PC
where the 980 GUI Manager is running. Select an EDID file by activating the Set 980 Rx EDID (shown on the
screen below).
Page 258
Rev. A1
June 16, 2017