Table of Contents
Advertisement
980 DP 1.4 Video Generator / Analyzer - User Guide
Rev. A1
6.2
Configuring the number of downstream MST nodes.
Use the following procedure to configure the number of downstream MST nodes.
To add an MST node(s):
1. Click on the Add
activation button on the left to add an MST node. The downstream nodes are
shown in blue. Click Refresh if necessary. Refer to the screen example below.
Note: The VC #x buttons and the EDID and DPCD activation buttons are not currently functional.
The following dialog box appears enabling you to select the number of downstream MST nodes (Virtual Channels).
Page 96
June 16, 2017
Advertisement
Table of Contents
