Testing Hdcp On A Connected Display - Teledyne 980 DP1.4 User Manual

Video generator / analyzer module
Table of Contents

Advertisement

980 DP 1.4 Video Generator / Analyzer - User Guide

3.13 Testing HDCP on a connected display

Use the following procedures to test HDCP 1.3 authentication on a connected display. HDPC is tested using a
special test image called HDCPProd and HDCP2. You can also run the HDCP test using the HDCP test utility.
When running the test with the HDCPprod test image you can view the results of the test on the connected DP
display. These test images are selectable through the Pattern tab.
3.13.1 Running the HDCP test using the HDCPprod test image
Use the procedures below to run an HDCP test on a connected display using the HDCPprod test image.
To test HDCP on a connected display:
1. Access the Pattern tab to view the test patterns and select HDCPprod test image.
The results and status of the test can be viewed in the connected DP display.
A typical result is shown below.
Page 65
Rev. A1
June 16, 2017

Advertisement

Table of Contents
loading

Table of Contents