Dp Multi-Stream Transport (Mst) Testing; Accessing The Mst Topology Window - Teledyne 980 DP1.4 User Manual

980 DP 1.4 Video Generator / Analyzer - User Guide Rev. A1

6 DP Multi-Stream Transport (MST) Testing

The 980 DP Video Generator / Analyzer module emulates an MST source for testing an MST branch device or
MST-capable monitor. Up to four (4) streams are supported depending on bandwidth (resolutions) with a depth of
one. You can configure the MST topology using a graphical interface. The optional Auxiliary Channel Analyzer
(ACA) utility depicts the MST negotiations with the connected MST Rx device.
When MST is configured, the same video pattern and audio signal is transmitted to all downstream nodes. There is
a number indicator that appears on the upper left screen of the downstream MST sink that identifies which stream
is being delivered.
6.1

Accessing the MST Topology window

Use the following procedure to test MST on a connected MST-Capable sink device.
1. At the Generator dialog box, select MST from the Interface drop down menu. Refer to the screen example
below.
Page 92 June 16, 2017