Furuno FEA-2107-BB Installation Manual page 85

Conning display
LEFT BOTTOM
Figure above shows how the windows are located in Conning Display.
1) Select Conning Mode (Harbour1, Harbour2, Navigate1 or Navigate2).
Note, Stand-alone Conning Mode is used only with Conning Processor CP-01 and sidebar
Conning Display.
You can make individual settings for each Conning Mode in the Settings field.
2) Use Default Palette setting to define background of Conning Display. This palette is used
when you start Conning Mode in question.
3) Define which windows are displayed in each Conning Mode in the Display field. For more
information about content of windows, see the Operator's Manual.
• Alarm messages windows are used only if Device Interface of Alarm Inputs is
"$CAALA".
• Track pilot extended window is used only if steering mode of Trackpilot is "Program
Track".
• Service nnnn windows are intended for use by a service engineer during sea trials.
4) Select Traditional, Double speed, Small size or Small with Double speed.
5) Select Traditional or Detailed.
Note: The number of conning display can be changed only when installing the program. For
detail, see Service Manual.
CALC
RIGHT BOTTOM
3. ADJUSTMENTS
POSN
DGPS
0.0Kt
17.2Kt 17.2Kt
SPD SOG
0.0Kt
Double Speed display
3-43