Furuno FEA-2107-BB Installation Manual page 15

Flush mounting
Use the optional flush mount kit FP03-09870 to mount the control unit RCU-018/015FEA
and/or RCU-016 to a console panel.
Name: Flush mount kit
Type: FP03-09870
Code No.: 008-535-630
No. Name
1 Mount plate
2 Hex. nut
3 Wing screw
1. Prepare a cutout in the mounting location as shown in the figure below.
2. Set the control unit to the cutout.
3. Screw four wing bolts into hex. nuts.
4. Screw the above wing bolts into mounting plates.
5. Attach the mounting plate to the control unit with four screws (M4x12, supplied with the
control unit) from the bottom side.
6. Fasten four wing screws, and then fasten hex. nuts to fix four wing screws.
#70
A
RCU-018
Type
03-163-7531
M5
M5x40
±2
388
For RCU-018
Code No.
100-306-260
000-863-206
008-047-990
170±2
For RCU-015FEA/16
#70
A
RCU-015FEA/RCU-16
1. MOUNTING
Qty
4
4
4
176±2
150±2
171
1-7