Furuno FEA-2107-BB Installation Manual page 44

3. ADJUSTMENTS
3.1.2 Local Area Connection for LAN2 (ECDIS LAN Network)
LAN2 interface is used to connect a LAN Adapter or HUB-100 to ECDIS EC1000C. To
configure IP Address for this, proceed as follows:
1. Open Control Panel.
2. Double click Network icon.
3. Highlight Local Area Connection 2 and then select Properties in File menu.
0
4. In Local Area Connection 2 Properties, highlight Internet Protocol (TCP/IP), and then
press Properties button.
5. Set IP Address as 10.0.0.180 (for the first ECDIS) or 10.0.0.181 (for the second ECDIS).
6. Set Subnet mask as 255.255.0.0.
7. Click the OK button to close the window.
To use the EC-1000C as No.2, see page 3-99.
3-2