Furuno FEA-2107-BB Installation Manual page 140

3. ADJUSTMENTS
5. Click "Group" in the View
filters, and then choose "ALL".
6. Choose all available charts in
the Outside window at the
bottom of the window.
7. Press << button to set group
"ALL" as active.
8. Open SENC Convert window
from the Chart Menu and
activate conversion for group
"ALL", press Convert button
to start conversion for Group
"ALL".
You will get a list of charts to
be converted to SENC format.
(Content of Conversion List
depends on charts loaded into
ECDIS.)
When conversion is completed,
the Conversion List will be
empty again.
For details, see chapter "How to use SENC Convert window to initiate SENC conversion" in
Operator's Manual.
3-98