Furuno FEA-2107-BB Installation Manual page 135

14. Sharing information can be
entered here and then
press Next button.
15. Select a COM Port for the
Control Head, set other
parameters as appropriate,
and press the Next button.
COM Port: "COM2" only
Alarm Tone: "7" only
16. Select Monitor type,
calibration and Control Port
for display, and press the
Next button.
17. Set ECDIS and IP Address
for ARPA. Set I/O base port
for Radar Overlay, and
press the Next button.
3. ADJUSTMENTS
3-93