Furuno FEA-2107-BB Installation Manual page 61

3. ADJUSTMENTS
Radar Echo Overlay (LAN) from FAR-2xx7 and FCR 2xx7 series radar through LAN
The following settings are for Radar Echo Overlay (LAN) received from FAR-2xx7 and
FCR-2xx7 series radar through LAN.
Set the radar connected
through the network. The
radar echo set "Connected:
Yes" here can be overlay
displayed on the chart. When
multiple radar are set to
"Yes", select one at RADAR
OVERLAY (Main
Menu>Radar).
Radar transceiver:
Select the radar to set.
Device Interface:
IMO Radar: For FAR-2xx7,
route information loading; OK
Chart Radar: For FCR-2xx7,
route information loading; -
Chart Radar with INS:
For FCR-2xx7, route
information loading; OK
Chart Radar with CCRS:
For FCR-2xx7, route
information loading; OK (all
route)
Label:
Set the name for each radar
(max. 6 characters) to use on
RADAR OVERLAY.
From Radar antenna to
Conning position:
Enter the distance between
antenna and conning
positions (Range: -500 to
+500). Upper: port-starboard
direction, lower: bow-stern
direction
IP address, Port numbers,
Radar display number:
Not used.
3-19