Furuno FEA-2107-BB Installation Manual page 62

3. ADJUSTMENTS
If Radar overlay is not
received through LAN, set
Connected as NO for each
transceiver (1-4).
Radar transceiver 1 is
Connected as Yes.
Device Interface defines
source of RADAR target
(IMO RADAR or Chart
Radar).
Label defines name for
source of video.
From Antenna to Conning
position defines offset
position of radar antenna.
Note that Radar display
number is defined in Radar
Display settings in the field at
right "LAN Radar". See figure
below.
3-20
Edit parameters - Radar Echo Overlay/Communication (LAN)
Radar transceiver
Connected
Device interface
Label
From Radar antenna
to Conning position
IP address
172.31.3.6
Port numbers
10024 for Radar echo output
10028 for Radar communication
Radar display number
1
Edit parameters - Radar Echo Overlay/Communication (LAN)
Radar transceiver
Connected
Device interface
Label
From Radar antenna
to Conning position
IP address
172.31.3.6
Port numbers
10024 for Radar echo output
10028 for Radar communication
Radar display number
1
Edit parameters - Radar Display
Radar Displays
Radar Display
Connected
Adapter Channel
Device Interface
Rx Talker Identifier
LAN Radar
IP address
172.31.3.6
OK
1
Cancel
NO
IMO Radar
MASTS
2
m {+Stbd, -Port}
20
m {+Bow, -Stern}
1
Cancel
YES
IMO Radar
MASTS
2
m {+Stbd, -Port}
20
m {+Bow, -Stern}
Display 1
YES
4
FURUNO FAR-2x07 (LAN)
RA
1
Cancel
OK
OK