Ethernet Cable Connection - Furuno FEA-2107-BB Installation Manual

2. WIRING
2.8

Ethernet Cable Connection

One ECDIS can be connected to another ECDIS with optional cable MOD-Z072-020+,
which is 2 m long. If you need a longer cable, connect LAN (Local Area Network), using
RJ45 connectors. Cable used between two ECDIS devices should be UTP (Unshielded
Twisted Pair). See figures and tables below.
Pin out of female connector at ECDIS
Pin Name
1 TX+ Transmit Data +
2 TX- Transmit Data -
3 RX+ Receiving Data +
4 N/C Not connected
5 N/C Not connected
6 RX- Receive Data -
7 N/C Not connected
8 N/C Not connected
RJ45 Female connector (at the ECDIS)
RJ45 Male connector (at the cable)
Description
Wiring of the twisted cable
First end Pin
1
2
3
6
Second end Pin
3
6
1
2
2-21