Furuno FEA-2107-BB Installation Manual page 144

4. INPUT/OUTPUT SIGNALS
ARPA Radar
• Two ARPA radars can be connected using one of the following communication protocols.
• IEC 61162-1 Ed.1 or Ed.2 standard messages $XXOSD and $XXTTM for input and
messages $ECGLL, $ECDTM, $ECDPT and $ECMWV for output. Targets numbered
from 1 to 100 are accepted in TTM message. The datum of GLL message is fixed
and it is WGS84 (for serial interface only).
• FURUNO interface with IEC 61162-1 Ed.1 standard messages $XXOSD and $XXTTM
for input and messages $IIGLL, $IIOSD for output + proprietary messages for user
charts, routes, curved ebl, etc (for serial interface and LAN).
AIS transponder equipment
• One serial input interface (IEC 61993-2 Ed.1 message !XXVDM, message types 1,2,3
and 5, min 1 message per 10 seconds)
• Notes:
• Max. 1500 simultaneous AIS targets can stored for display purposes.
• Max. 200 simultaneous AIS targets out of 1500 stored can be displayed.
Trackpilot
• Serial data interface based on NMEA V1.5 messages for EMRI SEM-200 or FURUNO
FAP-2000 Trackpilot (IEC 62065 category B and C for TCS)
• Or serial data interface based on NMEA messages for YOKOGAWA autopilot (NOTE: IEC
62065 type approval of category B for TCS)
• Or serial data interface based on NMEA messages for TOKYO KEIKI autopilot
(NOTE:IEC 62065 type approval category C for TCS)
4-2