Furuno FEA-2107-BB Installation Manual page 69

Second Radar display (FCR-28x7):
You can define to which LAN radar it is connected at the "LAN Radar" field.
Note that the following settings above together with the settings below must be done for
LAN Radar settings:
Note 1: "Radar display number" defines IP address for connected Radar Display.
Note 2: Following values can be tailored: Radar transceiver, Connected, Device
Interface, Label, From Radar Antenna to Conning Position and Radar display
number. Leave other values as is.
Edit parameters - Radar Display
Radar Displays
Radar Display Display 2
Connected
YES
Adapter Channel
1
Device Interface
FURUNO FAR-2x07 (LAN)
Rx Talker Identifier
RA
LAN Radar
2
IP address
172.31.3.7
OK
Edit parameters - Radar Echo Overlay/Communication (LAN)
Radar Display 2
Connected
YES
Device Interface
Chart Radar
Label
MASTS
From Radar antenna
2
to Conning position
30
IP address
172.31.3.7
Port numbers
10024 for Radar echo output
10028 for ARPA communication
Radar display number
2
Cancel
OK
Cancel
m (+Stbd, -Port)
m (+Bow, -Stern)
3. ADJUSTMENTS
3-27