3. ADJUSTMENTS
Radar id and Radar transceiver -fields are used to select indirectly radar antenna offsets
from Conning position, which is defined as Conning position in the General parameters
page.
In the example above there are settings for ARPA radar display 1:
• If ARPA Radar display sends radar id 1, it is connected to Radar transceiver 1 and
offset is defined in Radar Echo Overlay (Analog) parameters page for Transceiver 1.
• If ARPA radar display 1 sends radar id 2, it is connected to Radar Transceiver 2 defined
in Radar Echo Overlay (Analog) parameters page.
Example1:
FURUNO IEC 61162-1 device interface with various TX Talker IDs.
3-24